Table of Contents
Advertisement
Cycle Recording
This operation can be set for cycle recording from the video menu (eg: 5 minutes).
Each video can be saved every 5 minutes. When the card is full, it will record over any
unprotected file according to the principle of first in, first out.
eg: Set up loop recording for 5 minutes:
Press the MENU button to enter menu mode. Use the UP/DOWN buttons to select
cycle recording. Press OK button to enter cycle mode selection - ("close: 1 minute,
2 minutes, 5 minutes" are available). Select "5 minutes" by using the UP/DOWN button.
Then press the OK button to return to main menu. Press the MENU button to return to standby mode.
Battery Charging
The red indicator will be on when plugged into an external power supply. This indicates that
the battery is being charged. When the red indicator light glows darker, the battery has been
fully charged. The battery symbol display will show in the upper right corner of the screen.
Note:
When the unit stops working, use a small pointed object to press the RESET button.
The unit should restore to factory settings.
5.
Advertisement
Table of Contents
