Table of Contents
Advertisement
8
Security
The machine must only be used for the stapling and folding of
paper. Connect machine only to an earthed power outlet. Switch
off after use.
Make sure that the power requirement indicated at the machine's rear side is
the same being provided on your premises before connecting the power cord.
Check function of safety shut off regularly: The machine must not run with
cover opened.
Clean and service the machine only with the power cord disconnected.
Place on an even support and never in a damp or humid surroundings, avoid
direct sunlight as this causes problems for the sensors and LED Screen.
Never put mugs, glasses or bottles onto the machine.
If you notice smoke, heat, excessive noises or any unusual performance,
disconnect the power cord immediately and call your TFP Service.
Technical data
Input paper sizes for booklets A5 (210 x 148.5) to SRA3 (320 x
450) Maximum booklet size
paper Stapling heads
Staple magazine
Staples/Loop Staples
length)
Cycle speed
Power requirements
Weight (shipping weight)
Dimensions (H x W x L)
Shipping dimensions
Accessories
The Finishing Point, 222 Europa Boulevard, Gemini Business Park, Warrington, Cheshire, WA5 7TN
60 pages or 15 sheets 80gsm
2, upgradeable to 4
210 staples/stapling head
EasiBook 26/6 (6mm leg
EasiBook Ri 26/6 (6mm leg length, loop)
EasiBook 26/8S (8mm leg length, steel)
User dependent up to 500 booklets/h
230 V AC 50Hz 100W
39 kgs (42 Kgs crated)
290mm x 490mm x 510mm
420mm x 680mm x 600mm
Stand on Casters (Special Order)
Additional stapling heads
Original EASIBOOK-
Staples
Advertisement
Table of Contents
