Table of Contents
Advertisement
4
Paper width
Position the left side guide (10) according to the paper format required using
the scale (2) and fix it with the knurled screw (1)
Insert paper squaring it up parallel to the left guide (10)
Shift the right side guide (11) closely to the inserted paper and fix it, leaving
1mm of air. Important: The side guides (10, 11) must not catch on the
movement of the sheets.
Paper length
Open cover (4)
Adjust and fix the back stop (14) according to your paper format using the
scale, Close cover (4)
Position of stapling heads
The BOOKLETMAKER EASIBOOK 15 is able to use four stapling positions
with up to four stapling heads. DIN-distances between the stapling heads are
50x80x50MM
Unlock the latch (15)
Take out stapling head, put it into a new position and lock the latch (15).
The driver blade's (16) hole needs to be hinged onto the pin (17), and the
DRIVER NUMBER "26"on the driver blade must show towards the rear
side of the machine.
Bookletmaking or folding
Adjust guides (10, 11, 14) to paper format & lock in position
Ensure the machine mode is switched on to Staple & Fold via rear lever.
Insert paper making sure the sheets are squared up correctly. Skew can be
adjusted using the knurled knobs either side of the locking adjuster.
Push the Start Button.
Once happy with the outcome you can press Auto Mode and feed booklets one
after the other without the need to press start each time.
The stacker (3) can be used to stack a couple of booklets. If you only want to
fold paper without stapling then just remove the staples from the stapling
heads.
The Finishing Point, 222 Europa Boulevard, Gemini Business Park, Warrington, Cheshire, WA5 7TN
Advertisement
Table of Contents
