Use Your Tv; Switching On Your Tv And Putting It In Standby Mode; Adjusting Volume; Switching Channels - Philips 32PFL3509 User Manual

These operations are accessible by Remote Control.
Some may also be accessible by control panel on the main unit.
4 Use your TV
Switching on your TV and putting it in
Standby mode
To Turn the TV On from Standby or Off to Standby
• Press . on the front panel or the Remote Control.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
Adjusting Volume
To decrease or increase Volume
Press VOL ◄(down) / ►(up) on the front panel or VOL + / − on
•
the Remote Control.
To mute or unmute sound
• Press on the Remote Control to mute the sound.
• Press again or VOL + / − to recover the original sound.
Switching Channels
To select Channels by using PROG. ▲/▼ or CH + / −
• Press CH ▲(up) / ▼(down) on the front panel or CH + / − on the
Remote Control.
To select Channels by using the NUMBER keys
– When selecting cable or Analog channel 11
Note
• To select the non-memorized channels, use the NUMBER keys.
• N o Signal will appear on the TV screen after the subchannel broadcast is over.
Watching Channels from an External Device
Switching Each Input Mode can easily switch with the Remote Control
between TV and external devices when they are connected to the unit.
1
Turn On a Set-top Box or the connected device.
• The picture from your Set-top Box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
① Press
SOURCE repeatedly to select the Set-top Box or the
connected device and wait a few seconds till the Picture appears.
② Use the Remote Control of the Set-top Box or the connected
device to select Channels to view.
TV
AV
YPbPr
HDMI 1
HDMI 2
PC
USB
15
English