Nokia 6230i User Manual page 60

M e n u f u n c t i o n s
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.
EGPRS
General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an Internet protocol (IP) -based network.
GPRS is a data bearer that enables wireless access to data networks such as the
Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For
more information on availability of EGPRS and data transfer speed, contact your
network operator or service provider.
The applications that may use EGPRS are MMS, video streaming, browsing
sessions, e-mail, remote SyncML, Java application downloading, and the PC
dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select GPRS or
(circuit switched data, CSD).
EGPRS connection
Select Menu > Settings > Connectivity
following options:
Always online to set the phone to automatically register to an EGPRS network
when you switch the phone on.
If you receive a call or a text message or make a call during a EGPRS connection,
indicates that the EGPRS connection is suspended (on hold).
When needed to set the EGPRS registration and connection to established when
an application using EGPRS needs it and closed when you end the application.
EGPRS modem settings
You can connect the phone using Bluetooth wireless technology, IR, or data cable
(DKU-2) connection to a compatible PC and use the phone as a modem to enable
EGPRS connectivity from the PC.
To define the settings for EGPRS connections from your PC, select
Settings > Connectivity > GPRS
60
> GPRS > GPRS connection
indicates that EGPRS service is available.
> GPRS modem settings > Active access
GSM data
and from the
Menu >
point,