Video Dvd Mode; System Settings - Mercedes-Benz Audio 20 2012 Operating Instructions Manual

System settings

84
Select Treble or
X
button to confirm.
An adjustment scale appears.
To make a setting: press the 9
X
or : button until the desired format has
been selected.
To confirm your selection: press the 9
X
button.
Multiple users
Simultaneous use of the rear-
compartment disc drive
The two rear-compartment screens can be
operated almost entirely independently from
one another. However, there can be a conflict
in some menus if the two screens are used
simultaneously.
If the rear-compartment disc drive is being
used for both screens simultaneously,
selecting certain menus or settings on one of
the screens also affects the other screen.
The following functions affect both screens:
changing playback options
R
selecting a track (from a track list or folder)
R
using play, pause and stop
R
fast forwarding/rewinding or scrolling
R
calling up the DVD menu and navigating
R
within it
setting the language, subtitles and camera
R
angle
calling up interactive DVD content
R
The following functions affect only one
screen:
audio and video functions as well as picture
R
settings
switching between full screen and the
R
menu
Bass and press the 9
Switching between operating modes
When you exit an operating mode (e.g. audio
CD mode), the current setting is saved. If you
call up this operating mode again later, there
are two possibilities:
the operating mode has been changed on
R
the other screen.
the operating mode has not been changed.
R
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
Function restrictions in video DVD
mode
Certain functions or actions may be
temporarily or completely unavailable. As
soon as you try to activate these functions or
actions, you will see the K symbol in the
display.
System settings
Note
You can adjust almost all system settings
individually for each screen without affecting
the other screen. Use the remote control to
adjust the settings ( page 25).
Y
Calling up the system menu
Select System in the main functions menu
X
bar and confirm with the 9 button.
You see the system menu on the selected
rear screen.