System Settings; Video Dvd Mode - Mercedes-Benz Audio 20 Operating Instructions Manual

System settings

90
calling up the DVD menu and navigating
R
within it
setting the language, subtitles and camera
R
angle
calling up interactive DVD content
R
The following functions affect only one
screen:
audio and video functions as well as picture
R
settings
switching between full screen and the
R
menu
Switching between operating modes
When you exit an operating mode (e.g. audio
CD mode), the current setting is saved. If you
call up this operating mode again later, there
are two possibilities:
the operating mode has been changed on
R
the other screen.
the operating mode has not been changed.
R
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
Function restrictions in video DVD
mode
Certain functions or actions may be
temporarily or completely unavailable. As
soon as you try to activate these functions or
actions, you will see the K symbol in the
display.
System settings
Note
You can adjust almost all system settings
individually for each screen without affecting
the other screen. Use the remote control to
adjust the settings ( page 25).
Y
Calling up the system menu
Select System in the main functions menu
X
bar and confirm with the 9 button.
You see the system menu on the selected
rear screen.
Selecting the display language
Select Settings using the = or ;
X
button and press 9 to confirm.
Using the : or 9 button, select
X
Language and press the 9 button to
confirm.
The list of languages appears. The # dot
indicates the current setting.
To change the setting: use the 9
X
or : button to select a language.
Press the 9 button.
X
The Rear Seat Entertainment System
activates the selected language.
Switching the display design
Select Settings using the = or ;
X
button and press 9 to confirm.
Select Day Mode, Night Mode
X
Automatic using the 9: buttons
and press the 9 button to confirm.
The dot in front of the menu item indicates
the currently selected setting.
or