Using Call Lists - Mercedes-Benz Audio 20 2012 Operating Instructions Manual

Using call lists

48
The first entry in the list that starts with the
letter selected is highlighted. If there are
similar entries, the next different character is
shown. For example, with entries such as
Hilden and Hilgers, the beginnings of the
names are similar. In this case you will be
offered a choice between
Select the characters of the entry you are
X
searching for one by one and press W to
confirm.
As soon as you make a clear selection,
Audio 20 switches automatically to the list.
To complete the search: switch from the
X
character bar to the list.
The first list entry is automatically
highlighted.
Changing the language of the character
bar
Select B and press W to confirm.
X
Select the desired language and press W
X
to confirm.
Changing the character set of the
character bar
Select p and press W to confirm.
X
Depending on the previous setting, the
entry mode changes to special characters
or to letters with numbers.
Selecting an entry directly from the list
Using the controller
You can switch to the list after the
X
character bar appears.
Turn cVd or slide ZVÆ the controller to
X
select an entry and press W to confirm.
Using the buttons on the multifunction
steering wheel
In the telephone basic menu in the
X
instrument cluster: press the 9
or : button briefly.
The previous/next entry in the phone book
D and G.
is displayed.
In the telephone basic menu in the
X
instrument cluster: press and hold the
9 or : button for longer than two
seconds.
The first entry in the list that has the
previous/next first letter in the phone book
is shown.
To make a call: press the 6 button.
X
Displaying details for an entry
Audio 20 can also display a shortened entry
in full.
Select an entry from the list.
X
Select the list symbol to the right of the
X
entry by sliding VY the controller and
press W to confirm.
Select
X
The detailed view appears.
To close the detailed display: turn cVd
X
or slide ZVÆ or XVY the controller and
press W.
Using call lists
Introduction
Audio 20 displays calls dialed and received
(including missed calls) during phone
operation in separate lists. Call lists are not
available unless a mobile phone is connected
with Audio 20.
Audio 20 supports the PBAP Bluetooth
profile. For this reason, note that the system
behavior differs, especially when telephoning
via the Bluetooth
R Bluetooth
Bluetooth
Details and press W to confirm.
®
interface:
®
telephone with PBAP
®
profile:
®