General; Water Quality Statement; Models - Vulcan-Hart SCALEBLOCKER SMF600 Installation & Operation Manual

INSTALLATION, OPERATION AND CARE OF
SCALEBLOCKER™ WATER FILTER SYSTEM
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Vulcan water filters are produced with quality workmanship and material. Proper installation, usage
and maintenance of your water filter will result in many years of satisfactory performance.
It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions
provided.
The water filter system conforms to ANSI/NSF Standard 53 and ANSI/NSF Standard 42 for the specific
performance claims as verified and substantiated by test data.

WATER QUALITY STATEMENT

The fact that a water supply is potable is no guarantee that it is suitable for steam generation. Systems
are not to be used where water is microbiologically unsafe or with water of unknown quality without
adequate disinfections before and after use. Other factors affecting steam generation include iron
content, amount and type of chlorination (Chlorine & Chloramines), and dissolved gases. Water supplies
vary from state to state and from locations within a state.
As with all steam related products, water filtration and regular filter replacements coupled
with routine Deliming are required.

MODELS

Rated Capacity (Gallons)
Flow Rate (GPM)
Supplied Water Pressure*
Supplied Water Temperature
*For cold water use only.

GENERAL

SMF600
7,500
2
40-125 PSI
45-100°F
Rated Capacity
Flow Rate
Supplied Water Pressure*
Supplied Water Temperature
— 4 —
SMF620
12,000
4
40-125 PSI
45-100°F