Adjusting The Refrigerator Shelves; Removing The Meat Drawer; And Cover - Roper RT18HD Use And Care Manual

Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator.
To remove shelves:
1. Remove items from shetf.
2. Tilt shelf up at front.
3.
Lii back of shelf.
4. Pull sheff straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots
in the sheff supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Removing the meat drawer and cover
The meat drawer and cover can be removed
for cleaning or moved to another shelf, if
desired. Remove the meat drawer first.
To remove the meat drawer:
1. Slide the drawer straight out to the stop.
2. Lii the front.
3.
Slide drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove the meat drawer.
2. Till front of cover up.
3. Pull cover up and out.
To replace the cover:
1. Fit bottom notches of cover over rear and
center cross bars of sheff.
2. Lower cover into place.
3. Replace the meat drawer.
Lift the front,
then the back
stop, lift the front
and pull again.