Using The Battery - Pantech Flex P8010 User Manual

Installing the SIM or USIM card
1. Insert a finger into the groove at the bottom of the phone,
and then lift up to remove the battery cover.
2. Remove the battery.
3. Insert the SIM or USIM card into the card slot. Ensure that
the gold contacts on the card are facing the metal contacts
on the phone.
4. Reinsert the battery and reattach the battery cover.
About SIM or USIM cards
When you sign up for phone service, you will receive a SIM
or USIM card that contains your registration information,
PIN code, and other personal data. Keep the card secure
and handle it carefully. Do not bend or scratch the card and
keep it away from moisture and static electricity. Pantech is
not responsible for damages caused by theft or loss of your
personal data.

Using the battery

Inserting the battery
1. Turn off the phone, if it is not already turned off.
2. Insert your finger into the groove at the bottom of the
phone, and then lift up to remove the battery cover.
3. Align the gold contacts on the battery with the contacts
located at the top of the battery compartment.
4. Slide the battery into the phone until it lays flat in the
compartment.
5. Reattach the battery cover.
Note Be careful not to damage your fingernails when you remove the
battery cover.
13
Getting Started