Sim Card And Battery - Pantech Multisync User Manual

SIM card and battery

About your SIM card
When you subscribe to your network operator, you receive a SIM
(Subscriber Identity Module) card containing your registration information,
PIN code, etc.
Like a credit card, it should be kept secure and handled carefully. Do not
bend, scratch or expose it to moisture. Avoid static electricity.
To avoid corrupting your SIM card's memory, always switch off your phone
before removing or inserting your SIM card.
About your battery
Your phone uses a Li-Ion battery. Make sure to use an authorized battery
and charger only. For more details, please inquire at your nearest dealer.
NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. Unlike
other forms of battery technology, you can recharge your battery while
some charge remains without reducing your phone's autonomy due to the
"battery memory effect" inherent in those technologies.
Installing/removing SIM card and battery
1. Remove the battery cover from the unit. To fit
the battery cover, put it on the guide rail and
push up.
2. Insert the SIM card into the slot. The gold contacts
of the SIM card should go against the metal
contacts of the phone. Put the contacts of the
battery into the hole located at the bottom of the
unit insert and press the upper side of the battery
until you hear the "click".
3. To remove the battery push the bottom of the
battery to upwards(1) and remove(2) the battery..
Push the SIM card in the direction of the arrow as
shown.
To charge your battery
1. To charge, open the protective cover on the top right side and
connect the charger adapter.
Make sure you align the connector as the image. If not, it will
damage the charging connector on the phone and will not charge.
2
1
2
1