Related Manuals for Teac CT-M511S
Summary of Contents for Teac CT-M511S
- Page 2 TEAC AUSTRALIA TECH MEMO #TV# 05.08.94 Model: CTM511/5S, CTM631/5S, CTM711/5S - Stereo Televisions Symptom: The instability of the Stereo Identification Signal on some high quality live stereo TV programs will cause split-second Sound distortion that may be confused as ‘Sibilance’. Replacement of C015 will improve filtering of the ID signal and remove any interference causing the effect.
- Page 3 TEAC AUSTRALIA TECH MEMO 23.07.94 Model: CTM511/5S, CTM631/5S, CTM711/5S - Stereo Televisions Symptom: All sets have in common a 12 Volt Zener Diode ((ZD 402 - 12V/1W) short and limiting Resistor (0.68Ω and/or 6.2Ω) open, or vertical collapse (TDA 3653B) and/or Horizontal output transistor (2SD1555 or 2SD1547) short.
- Page 4 TECHNICAL BULLETIN May 1999 MODEL: CT-M511S, 515S, 483, 484, 485 PROBLEM: FLAGWAVING WITH MACROVISION ENCODED TAPE. Instructions: Replace C137 with 680pF ceramic capacitor. In some televisions you may require a 470pF ceramic capacitor. Regards, Fabian Lubanovic TEAC Australia Pty Ltd.