Point Of View - Simrad AI50 Manual

AIS Class B Transceiver
Each circle displays range information on the left radial intersect point.
The range on your AI50 can be adjusted by using the
Pressing the
+ decreases the range across the display (zoom in).
If you wish to zoom in/out on vessels in a particular area, using the
▲▼◄► keys, place the cursor on the selected area, press and hold
either the
If your own vessel is still in view it will be shown as a small circle.
You can set your screen to display any of the 12 ranges, they are:
No.
1
2
3
4
5
6
7
8
9
10
11
12

6.4 Point Of View

The AI50 can display information in one of three ways; "NORTH UP",
"HEAD UP" and "COG UP". The symbol in the top left corner of the
display informs you of your current view.
Note
HDG UP will only be available if a compass source is present.
Pressing the DISPLAY/VIEW key, will cycle through the available
options; "NORTH UP", "HEAD UP" and "COG UP".
52
increases the range across the display (zoom out) and
+ or
Range
(between rings)
0.01nm
0.02nm
0.05nm
0.1nm
0.2nm
0.5nm
1.0nm
2.0nm
4.0nm
8.0nm
16.0nm
32.0nm
key, the display will zoom in/out at that point.
Total Range
(Across display)
Full display
0.08nm
0.16nm
0.4nm
0.8nm
1.6nm
4.0nm
8.0nm
16.0nm
32.0nm
64.0nm
128.0nm
256.0nm
+
(Showing own
vessel info bar)
0.06nm
0.12nm
0.3nm
0.6nm
1.2nm
3.0nm
6.0nm
12.0nm
24.0nm
48.0nm
96.0nm
192.0nm
keys.