Advertisement
Femtocell Multi-band SOHO
Safety Notes
GENERAL: Please read this Quick Start
Guide carefully before using the
Femtocell Multi-band SOHO. The purpose
of the Femtocell Multi-band SOHO is to
provide improved mobile signal coverage
inside a building. Do not use this device
for any other purpose, as doing so may
be dangerous.
PLACEMENT: The Femtocell Multi-band
SOHO and all its components (including
cables and power adaptor) should be
placed in a dry, indoor area, at elevated
heights such as on top of shelves,
cabinets, etc. It should be kept away from
any wet or damp environments; such as
kitchens, bathrooms, laundry rooms or
any other areas with exposure to
moisture, sprays, drips, or running water.
For the safety of stored data, it should
not be placed near magnetic devices such
as audio or video tapes, diskettes or
credit cards. While in service, the antenna
should not be co-located with another
antenna or transmitting device.
CONDITIONS OF USE:
Temperature rating: -5°C to 45°C.
Relative Humidity rating: 5% to 95%.
Maximum altitude: 3960m.
MEDICAL DEVICES: The Femtocell Multi-
band SOHO contains a radio transmitter.
Medical devices such as pacemakers and
hearing aids may be affected, unless
precautions are taken, when using this
device. Please contact your healthcare
provider for additional safety guidelines.
COMPLIANCE WITH APPLICABLE
EXPOSURE LIMITS: The Femtocell Multi-
band SOHO is a multiband radio
transmitter and receiver. When it's
turned on, it receives and transmits radio
frequency (RF) signals. The system
controls the transmitted power level
within a range up to 0.5 W, cumulated
over all transmitting bands.
EMERGENCY: The Femtocell Multi-band
SOHO does not operate during instances
of power loss. To make emergency calls
under this condition, please use a mobile
or land line phone.
POWER SUPPLY: Ensure that the voltage
specified corresponds to the power
socket to which you connect it. In case of
power loss (and therefore loss of
service), all mobile calls, including
emergency calls, will be redirected
automatically to the default mobile
(carrier) network. If you have no mobile
network coverage and need to make an
emergency call, please use a land line. In
case of a thunderstorm, please
disconnect the device to avoid damage.
For safety reasons, only authorized
service technicians should open the
device.
The AC/DC adapter meets the following
specifications:
Input power: 100-240VAC, 50-60Hz,
1.0A
Output power: 12VDC, 2A
INTERFACES:
All output ports are considered limited
power sources (LPS).
12
Quick Start Guide
Hide quick links:
Advertisement
