Using Intercom; Using Music Player; Specifications - Vertix Raptor-i User Manual

USING INTERCOM

Any paired Raptor-i unit can activate the Intercom function of the other paired Raptor-i units based on the
command given and the current function priority of the other paired Raptor units. The Intercom has "Middle"
Priority. (See "MODE PRIORITY")
Enable Intercom (Last communicated or Paired Raptor-i)
To enable intercom function with the last communicated or Paired Raptor-i, press and release the
POWER / INT button once.
To enable intercom function with the 2nd last communicated / Paired Raptor-i, press and release the
POWER / INT button twice.
If the Raptor-i unit is in range and the connection is successful, the speakers will produce a "TOO" sound
followed by a short high pitched beep.
If the connection was unsuccessful, the speakers will produce a long low pitched beep.
Upon successful connection, you may start speaking to the other Raptor-i in Full-Duplex.
NOTE: Any paired Raptor-i unit can activate the Intercom function of the other paired Raptor-i units based on
the command given and the current function priority of the other paired Raptor-i units. The Intercom has
"Middle" Priority. (See "MODE PRIORITY")
Disable Intercom
To disable intercom function, press and release the POWER / INT button once to disable intercom function. You
should hear a long "TOO" sound.
Volume Adjustment
To adjust the volume, press and hold the VOL UP or VOL DOWN buttons until the desired volume is reached.
NOTE: When Maximum volume is reached, the speakers will produce 2 low pitched beeps
11

USING MUSIC PLAYER

The Music Player has "Low" priority. (See "MODE PRIORITY").
Play Music
Press and release the CALL CONTROL button once
to start playing Music. (the same applies if the
mobile phone or GPS Sat-Nav device has music
player function). Please consult the User Manual for
your music player device as they may work
di erently.
Previous Track
Press and release the VOL DOWN button.
NOTE : The Raptor-i supports ONE(1) Bluetooth® Stereo (A2DP) player. If your mobile phone is also used as your
music player, you CANNOT connect another Stereo music (A2DP) player.

SPECIFICATIONS

Bluetooth® compatible : v2.0 Class 1
Bluetooth® compatible pro les : A2DP / AVRCP / HSP / HFP
Pairing : can recall up to 8 devices
Multipoint connection : up to four devices (e.g. 1 mobile phone + 2 intercom + 1 stereo (A2DP)
Frequency range : 2.4000 ~ 2.4835 GHz
Intercom : 3 users, Full-duplex, upto 500m (1,640ft) with Line-of-Sight
Remote Control Ready
FM Radio : 76-108MHz
Volume Adjustment
To adjust the volume, press and hold the VOL UP or VOL
DOWN buttons until the desired volume is reached.
NOTE: When Maximum volume is reached, the speakers
will produce 2 low pitched beeps.
Next Track
Press and release the VOL UP button.
12