Using Mobile Phone - Vertix Raptor-i User Manual

Clearing All Paired Devices
With the Raptor turned ON, you can clear all devices paired on your Raptor by pressing the CALL CONTROL and
VOL DOWN button together until you see 2 RED ashes.
MODE PRIORITY (Mobile Phone/Intercom/GPS/MP3 and FM)
Please note that only ONE (1) function or mode can be used or be ACTIVE at any time. Commands to the
Raptor-i to switch modes manually or automatically by incoming mobile or intercom calls will follow the priority
set out below:
Mobile phone commands
Highest Priority and will be switched over regardless of your current mode in use.
Intercom commands
Middle Priority. Will be switched over if you are listening to Music, FM Radio or GPS announcements.
GPS Sat-Nav commands
Priority depends on the GPS Sat-Nav device. GPS Sat-Nav models which support mobile phone pairing will be
accorded Highest Priority. Please consult your GPS Sat-Nav user manual.
Music, FM radio
For Music (MP3) and FM radio, it is best to turn OFF one before activating the other. As example, while in Music
(MP3) mode and you want to switch to FM radio, do a quick single press to turn OFF the Music (MP3) rst, then
do a quick double press to turn ON the FM radio.
You need not do this for incoming mobile or intercom calls as the Music (MP3) or FM radio will be automatically
switched out and resume after you end your mobile phone or intercom conversation.
9

USING MOBILE PHONE

The mobile phone has the highest priority order amongst all of the available functions. (See "MODE PRIORITY")
Answer Call
When a call comes in, the speaker will emit the mobile phone's ring tone. To answer, simply press and release
the call control button. Alternatively, you may leave it to ring and the auto pick up will answer after
approximately 12 secs or 3 rings.
Reject Call
When a call comes in, the speaker will emit the mobile phone's ring. To reject the call, press and hold the call
control button for about 2 secs, release when you hear a low pitched "TOO" sound.
End Call
To end a call, simply press and release the call control button
Transfering Call between your Raptor and mobile phone
While you are on the call, press and hold the CALL CONTROL button for 2 secs. Your call will be transferred to
your mobile phone. To transfer back to your Raptor, simply do the same, ie hold the CALL CONTROL button for 2
secs.
Voice Call
Some mobile phones have Voice Control functions. To activate the Voice Control, press the "VOL UP" button
twice quickly.
Volume Adjustment
To adjust the volume, press and hold the VOL UP or VOL DOWN buttons until the desired volume is reached.
NOTE: When Maximum volume is reached, you will hear 2 low pitched beeps
10