Advertisement
Are You Sure? Select
Time Based Features
The following adjustments are possible:
Clock
Alarm Clock
Program Alert
Auto Shutdown
Sleep Mode
Upon entering this mode, turn Channel knob to highlight the desired function and press the Select button.
NOTE: No button activity for 10 seconds will also exit the desired (highlighted) function.
Clock
When entering this menu option, you can set up the clock shown on the default display, based on the
format desired, the time zone in which you reside and Daylight Savings Time, if used. The clock data is
provided via the Sirius stream, and will update based on the received signal.
Format:
The clock format option provides:
12 Hour (Default)
24 Hour
Use the Channel knob to highlight the desired for mat and press the Select button.
Time Zone:
The Time Zone option provides:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as GMT-3:30 Newfndlnd)
Use the Channel knob to highlight the desired time zone and press the Select Button.
Daylight Savings Time (DST) Observance:
Activate this function if your area is subject to DST;
Turn Channel knob to toggle between DST Observed (default) or DST Not Observed.
NOTE: When the shuttle has not been turned on or has been removed from the docking port for
any length of time be sure to position the antenna toreceive the satellite signal so the time can be
automatically updated. If the time information has been lost, the shuttle will not display the time
information and preprogrammed alarms will not be triggered until the shuttle updates the time
information using the satellite signal.
Alarm Clock:
When this menu option is highlighted and selected, you will be able to set the unit to turn on at a
specific time. The last selected stream prior to shutdown will be present when the Alarm feature is
activated. Additionally, a series of beep tones will be heard. Press any button on the front panel to
silence the alarm tones. The alarm will trigger again at the set time unless the Alarm Off feature is
selected under the Set Alarm function.
Yes
or
No
and press the Select button.
12
Advertisement
