Advertisement
list). Upon adding a stream, the text
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The
default lock code is
code perform the following procedure:
1. Press the MENU button to access the User Menu.
2. Turn Channel knob to select the
"Lock Options"
3. Press the Select button.
4. Turn the Channel knob to highlight
5. Press the Select button.
6. Enter the default code
7. The
New Code
number buttons. You will then be prompted to confirm the new code by entering your code
again.
8. The lock code is now changed.
Edit Code
Upon entering this mode, the user is prompted to enter the current four digit numerical code being
used to lock/unlock stream access. Once the correct code has been entered, the user is prompted to
enter the new 4-digit code twice. The second entry is requested for confirmation.
Audio Level Options
Upon entering this mode, a 10 segment horizontal bar graph is displayed with a
and a
+
sign to the right. The current setting is indicated on the bar graph. Turning Channel knob
will adjust the bar graph audio level indication and audio gain, accordingly. To select and exit this
function, press the Select button. No button activity for 10 seconds will also exit this function.
Antenna Aiming (Home Installation)
Upon entering this mode, two 10 segment horizontal bar graphs are displayed with a
left and a
+
sign to the right. The satellite signal strength is displayed by the SAT graph. The
terrestrial signal strength is displayed by the TER graph. Position the antenna to optimize either the
satellite or terrestrial signal. The current setting is indicated on the bar graph. Moving the antenna
location adjusts the bar graphs signal strength, represented by the filled-in bar graph squares, thus
ensuring optimum reception. To exit this function, press the Select Button.
NOTE: Terrestrial repeaters are typically used in large urban areas where structures may affect
the line of sight satellite signal. Terrestrial signals (TER) may not be available in your geographic
location.
Memory Options
In this mode, the user can turn the Memory Search Function (S-Seek) ON or OFF. In addition, all 20
Memory Locations can be cleared. On the display, the top line displays the text, Memory Options.
The following adjustment options are possible:
1. Automatic Memory Search function - On or Off.
Use the Channel knob to select between the 2 options by highlighting the desired selection. Then
press the Select button to enter the option.
2. Clear all Memory Locations. Press the Select button; a prompt display screen appears
confirming -
Lock
is removed from alongside the stream number/name.
0000 . This code can be maintained or changed. To change the default lock
Edit Code .
0000 .
prompt will appear. Enter your newfour digit code using the 0-9
11
-
sign to the left
-
sign to the
Advertisement
