Download Print this page

Jenn-Air JS42NXFXDE Dimension Manual page 4

42" fully integrated side-by-side refrigerator
Hide thumbs Also See for JS42NXFXDE:

Advertisement

JENN-AIR
42" FULLY INTEGRATED SIDE-BY-SIDE REFRIGERATOR
(BASE UNIT REQUIRES SUITE-COORDINATING FULL HEIGHT PANEL KIT OR CUSTOM PANELS AND HANDLES)
JS42NXFXDE – 41
OPENING/CLEARANCE DIMENSIONS
M
N
O
110º
110º
C
FRONT VIEW
BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
appliances are appropriately UL, CUL or CSA approved.
®
DETAILED PLANNING DIMENSIONS
®
" x 83
" x 24" (without door/handles)
3
1
4
8
e
A*
P
N
Q
O
B
R
S
D
E
C
w
F
MODEL #
A* Width (min.)
Width of recommended electrical
B
location
Distance from side of cabinet to
C
recommended water connection
location
D
Height (min.)
Height to recommended electrical
E
location
Depth of recommended water
F
connection location (max.)
e
Recommended electrical connection location
w
Recommended water connection location
Water
* A minimum 2" (5.1 cm) furniture return must extend behind the face
Shutoff
of the cabinet on all sides.
ELECTRICAL REQUIREMENTS
115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is
required. A dedicated circuit is recommended. Use an outlet that cannot
be turned off by a switch. Do not use an extension cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between 30 and 120 psi (207
and 827 kPa) is required to operate the ice maker. Call a licensed,
qualified plumber with any questions about the water pressure.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water coming out of a reverse osmosis
system going to the water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system is connected to the cold water
supply, the water pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).
LOCATION REQUIREMENTS
Floor must be able to support refrigerator (more than 600 lb [272 kg]),
door panels and contents of the refrigerator and must be at the same
level as flooring in the room.
4 of 4
JS42NXFXDE
in
cm
42
106.7
7
19.1
1
2
6
15.2
84
213.4
77
195.6
1
2.5
9211AdZw817

Advertisement

loading