Miscellaneous Settings Screen Details; Technical Specifications; System Dimensions - Dell Precision 7920 Rack Owner's Manual

Miscellaneous settings screen details

You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset tag, and changing the system
date and time.
You can view the Miscellaneous Settings screen by clicking System Setup Main Menu > System BIOS > Miscellaneous Settings.
The Miscellaneous Settings screen details are explained as follows:
Menu Item Description
System Time Enables you to set the time on the system.
System Date Enables you to set the date on the system.
Asset Tag Displays the asset tag and enables you to modify it for security and tracking purposes.
Keyboard NumLock Enables you to set whether the system boots with the NumLock enabled or disabled. By default the Keyboard
NumLock is set to On.
F1/F2 Prompt on Enables or disables the F1/F2 prompt on error. By default, F1/F2 Prompt on Error is set to Enabled. The F1/F2
Error prompt also includes keyboard errors.
Load Legacy Video Enables you to determine wether the system BIOS loads the legacy video (INT 10H) option ROM from the video
Option ROM controller. Selecting Enabled in the operating system does not support UEFI video output standards. This field is
only for UEFI boot mode. You cannot set this to Enabled if UEFI Secure Boot mode is enabled.
Dell Wyse P25BIOS This option is enabled by default.
Access
Power Cycle Specifies how the system reacts when system transitions to S5 state and is set to None.
Request

Technical specifications

The technical and environmental specifications of your system are outlined in this section.

System dimensions

Table 26. Dimensions
System
Precision 7920 Rack
110 BIOS and UEFI
NOTE: This option does not apply to 84-key keyboards.
Xa Xb
482.0 mm 434.0 mm
(18.98 (17.09 inches)
inches)
Y Za (with
bezel)
86.8 mm 35.84 mm
(3.42 inches)
(1.41 inches)
Za (without Zb
bezel)
22.0 mm 678.8 mm
(26.72
(0.87 inches)
inches)
Zc
715.5 mm
(28.17 inches)