Operating Your Cosmiq; Buttons And Navigation; Operating Modes - DEEPBLU COSMIQ+ User Manual

3. Operating your COSMIQ

3.1 Buttons and navigation

To turn on your COSMIQ
seconds. Your COSMIQ
Press the left button (MODE) button to cycle through the various operating modes.
Press the right button (ADJUST) button to adjust mode-specific settings.
In Watch Mode, your COSMIQ
inactivity to conserve battery power. While the screen goes blank, the computer is
still active. Press any button to activate your COSMIQ+ and turn on the display. You
can adjust the standby timeout in the Deepblu app.
To fully turn off your COSMIQ
both buttons simultaneously for 3–5 seconds.
NOTE: Always turn off your COSMIQ+ before flying, as changes in pressure may cause
it to start logging and exceed the no-decompression limit, locking you out of Scuba
Mode.

3.2 Operating modes

Your COSMIQ Dive Computer has 6 operating modes. You can tell which mode is
+
currently active by looking at the icon indicator at the top of the screen.
∙ ∙ Watch Mode : Shows the current time and date and allows you to make a
dive plan. If the time and date are incorrect, synchronize your COSMIQ+ with the
Deepblu app.
∙ ∙ Scuba Mode : Measures and displays all vital dive information while scuba
diving. It will also visually and audibly let you know if you are entering potentially
dangerous situations.
∙ ∙ Bottom Timer Mode
DOES NOT perform any decompression calculations. On the original COSMIQ
model, this mode was called Gauge Mode.
Dive Computer
COSMIQ
+
+
, hold the left and right buttons simultaneously for 3–5
+
will start in Watch Mode.
+
will automatically enter Standby after 20 seconds of
+
, make sure it is in Watch Mode or Standby, and hold
+
: Your COSMIQ
acts as a depth gauge and timer and
+
6
OVERVIEW
SAFETY
OPERATION OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
Back to Contents