Command Technologies COMMANDER VHF-2000 Manual page 4

SPECIFICATIONS
COMMANDER VHF 2000
LINEAR POWER AMPLIFIER
FREQUENCY RANGE - 50 - 54 MHz.
MODES - USB,LSB,RTTY,FM,CW
POWER REQUIREMENTS - 200/234VAC 50/60 Hz.
RF DRIVE POWER - 15 - 25 WATTS NOMINAL - 35-50
WATTS MAX. FOR FULL OUTPUT (1.5 KW SSB )
RF OUTPUT- +15DB GAIN OR 1500 WATTS
1200 WATTS MAX. FM OR RTTY
INPUT IMPEDANCE - 50 OHMS UNBALANCED
REAR PANEL ADJUSTABLE
OUT PUT IMPEDANCE - 50 OHMS NOMINAL
ANTENNA LOAD -(VSWR) - 2 : 1 MAX.
HARMONIC SUPPRESSION - BETTER THAN
- 60 DB DOWN @ RATED OUTPUT
INTERMODULATION DISTORTION- BETTER THAN
- 35 DB DOWN @ RATED OUTPUT
WEIGHT - 75 LBS
CABINET SIZE 18 X 16 X 7.75 in.
TUBE COMPLIMENT - TWO 3CPX800A7 CERAMIC
METAL TRIODES
PRESSURIZED CHASSIS FORCED AIR COOLING