Installation/Connection - Kenwood KMM-204 Instruction Manual

REFERENCES
Change the display information
Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information (eg. station name,
playing time) appears.
Source name
/
STANDBY Source name Clock
beginning)
RADIO Frequency Clock
(For FM Radio Data System stations only)
Station name Radio text
Title/Artist Frequency
the beginning)
USB (For MP3/WMA/WAV/FLAC files)
Song title/Artist Album title/artist
Folder name File name
Clock (back to the beginning)
iPod or When [MODE OFF]/[BROWSE MODE] is
ANDROID selected ( 8):
Song title/Artist Album title/Artist
Playing time Clock
beginning)
AUX Source name Clock
beginning)
14
ENGLISH
Display information
/
/
(back to the Source name (Date/Clock)
(back to the beginning) Frequency (Date/Clock)
(For FM Radio Data System stations only)
Radio text+ Station name (Date/Clock)
Clock (back to (Date/Clock)
Song title (Artist)
Frequency (Date/Clock)
beginning)
(For MP3/WMA/WAV/FLAC files)
Song title (Artist)
Playing time Song title (Date/Clock)
(Folder name)
Playing time (Date/Clock)
beginning)
When [BROWSE MODE] is selected
( 9):
Song title (Artist)
(back to the Song title (Date/Clock)
(Date/Clock)
(back to the Source name (Date/Clock)

INSTALLATION/CONNECTION

Warning
• The unit can only be used with a 12 V DC power supply, negative ground.
• Disconnect the battery's negative terminal before wiring and mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit.
• To prevent short circuit:
– Insulate unconnected wires with vinyl tape.
– Be sure to ground this unit to the car's chassis again after installation.
– Secure the wires with cable clamps and wrap vinyl tape around the
Caution
• For safety's sake, leave wiring and mounting to professionals. Consult the
car audio dealer.
• Install this unit in the console of your vehicle. Do not touch the metal
Radio text
parts of this unit during and shortly after use of the unit. Metal parts such
Radio text+ (R.TEXT+)
as the heat sink and enclosure become hot.
Song title (Date/Clock)
• Do not connect the [ wires of speakers to the car chassis or Ground wire
(back to the
(black), or connect them in parallel.
• Mount the unit at an angle of less than 30º.
• If your vehicle wiring harness does not have the ignition terminal,
Song title (Album title)
connect Ignition wire (red) to the terminal on the vehicle's fuse box which
File name
provides 12 V DC power supply and is turned on and off by the ignition
File name (Date/Clock)
key.
(back to the
• Keep all cables away from heat dissipate metal parts.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
• If the fuse blows, first make sure the wires are not touching car's chassis,
then replace the old fuse with one that has the same rating.
Song title (Album name)
Playing time
(back to the beginning)
wires that come into contact with metal parts to protect the wires.