Features And Functions; Sleep Timer; Name Of Parts - Fujitsu UTY-LRHYM Operating Manual

FEATURES AND FUNCTIONS

ECONOMY OPERATION
Limits the maximum operation current, and performs op-
eration with the power consumption suppressed. When
economy operation mode is operated, the room tempera-
ture will be little higher than the set-temp under cooling
mode and lower than set-temp under heating mode, There-
fore, the economy mode is able to save more energy than
other normal mode.
AUTO CHANGEOVER
The operation mode (cooling, dry, heating) is switched au-
tomatically to maintain the set temperature, and the tem-
perature is kept constant at all times.
10 °C HEAT OPERATION
The room temperature can be set to go no longer than 10°C, thus
ensuring that the room does not get too cold when no occupied.
PROGRAM TIMER
The program timer allows you to integrate OFF timer and
ON timer operations in a single sequence. The sequence can
involve 1 transition from OFF timer to ON timer, or from ON
timer to OFF timer, within a 24 hour period.

SLEEP TIMER

When the "SLEEP" button is pressed during Heating mode,
the air conditioner's temperature setting is gradually low-
ered during the period of operation; during cooling mode,
the temperature setting is gradually raised during the pe-
riod of operation. When the set time is reached, the unit
automatically turns off.

NAME OF PARTS

Receiver unit control panel
WIRELESS REMOTE CONTROLLER
The Wireless Remote Controller allows convenient control
of air conditioner operation.
HORIZONTAL AIRFLOW: COOLING/
DOWNWARD AIRFLOW: HEATING
For cooling, use horizontal airflow so the cool air does not
blow directly on the occupants in the room. For heating,
use downward airflow to send powerful, warm air to the
floor and create a comfortable environment.
OMNI-DIRECTIONAL AIR FLOW
(SWING OPERATION)
3-dimensional control over air direction swing is possible
through dual use of both an UP/DOWN air direction swing
and RIGHT/LEFT air direction swing. Since UP/DOWN air
direction flaps operate automatically according to the oper-
ating mode of the unit, it is possible to set air direction based
on the operating mode.
IMPORTANCE
You can use both wired and wireless remote controller si-
multaneously. But function is limited.
[The restricted functions for wireless remote controller ones]
• SLEEP TIMER
• TIMER
• 10 °C HEAT OPERATION
1
2
1 OPERATION indicator lamp (GREEN)
3
2 TIMER indicator lamp (ORANGE)
3 ECONOMY indicator lamp (GREEN)
4 "MANUAL AUTO" button
5 REMOTE CONTROL SIGNAL RECEIVER
4
5
En-2