Table of Contents
Advertisement
User Manual
4.2.6.1. Bridge Setting
Choose Bridge Setting in the left pane, the page shown in the following figure appears.
This page is used to configure the bridge parameters. You can change the settings or view
some information on the bridge and its attached ports.
The following table describes the parameters and button of this page:
Field
Description
Ageing
If the host is idle for 300 seconds (default value), its entry is deleted from
Time
the bridge table.
Show
Click it to show a list of the learned MAC addresses for the bridge.
MACs
Click Show MACs, the page shown in the following figure appears. This table shows a list
of learned MAC addresses for this bridge.
Advertisement
Table of Contents
