White Color Temperature - DAEWOO ELECTRONICS DSL-15C1T Service Manual

User R:
User G:
User B:
 6500:
 9300:
•
Save + Exit:
Comment :
•
1024x768:
•
75 HZ:
•
VER 0.01:
 Other features:
 Intellectual-Auto LV65E can start the Auto-Adjustment automatically when input a new
display mode at first time. After the adjustment, LV65E will remember this mode and
switch to optimized condition automatically for this mode whenever encounter this mode
again. Total 16 recent used modes are recorded into EEPROM.

VESA DPMS Functionality
screen about 3 seconds. If no further signal, then it shows "No Signal" and enter power
saving mode.

2.6 White Color Temperature

White color temperature is 3 preset as 9300, 6500 and User,
Red signal gain by user defined.
Green signal gain by user define.
Blue signal gain by user defined.
set CIE coordinate at 6500°K color temperature (when use 6500°k
color temperature, contrast display cannot change and cannot adjust).
set CIE coordinate at 9300°K color temperature (when use 9300°k
color temperature, contrast display cannot change and cannot adjust).
Save the setting value and exit OSD menu function.
Current mode resolution.
Current mode vertical frequency.
Firmware revision.
When signaled by the host CPU, LV65E shows a black
18