Table of Contents
Advertisement
Doc Title
:
Product Data – User's Guide
Model
:
MBP70x, MFV70x
Wallpaper 3
Monitor
Settings
Options
Sub-menu
Camera 1
Camera 2
Select
Camera
All Cameras
Camera 1
De-
Camera 2
Registration
All Cameras
Registration
-
5
DISPOSAL OF THE DEVICE (ENVIRONMENT)
At the end of the product lifecycle, you should not dispose of this product with normal household
waste. Take this product to a collection point for the recycling of electrical and electronic equipment.
The symbol on the product, user's guide and/or box indicates this.
Some of the product materials can be re-used if you take them to a recycling point. By reusing some
parts or raw materials from used products you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.
6
CLEANING
Clean your Motorola product with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or
abrasive solvents.
Cleaning and care
Do not clean any part of the product with thinners or other solvents and chemicals – this may cause
permanent damage to the product which is not covered by the warranty.
Keep your Motorola product away from hot, humid areas or strong sunlight, and do not let it get wet.
Every effort has been made to ensure high standards of reliability for your Motorola product. However, if
something does go wrong, please do not try to repair it yourself – contact Customer Service for assistance.
IMPORTANT
Always switch off and disconnect the power adapter before cleaning the digital photo frame.
7
TROUBLESHOOTING
Link light on the digital photo frame does not come on
•
Check whether the digital photo fame is powered on.
Link light on the digital photo frame flashes
•
The digital photo frame and the camera unit may be out of range with each other. Reduce the distance
between the units, but not closer than 2 metres.
•
The camera unit may be switched off. Press the
The digital photo frame beeps
•
Lost connection with the camera unit. Reduce the distance between the digital photo frame and the camera
unit, but not closer than 2 metres.
•
The camera unit may be switched off. Press the
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Description/Function
Selects the desired camera unit(s) to scan.
NOTES
Only camera unit(s) registered will be shown in the
list.
All Cameras
When
is selected, the screen of the
digital photo frame will automatically switch among
all the registered camera units, with each camera
unit being selected in turn at about 30 second
intervals.
Selects the camera unit you want to deregister.
NOTE
Only camera unit(s) registered will be shown in the
list.
Registers a camera unit to the digital photo frame.
button to switch on the camera unit.
button to switch on the camera unit.
Revision :
Page(s) :
R.00
19 of 24
Advertisement
Table of Contents
