Table of Contents
Advertisement
Doc Title
:
Product Data – User's Guide
Model
:
MBP70x, MFV70x
The supplied remote control comes installed with a CR2025 lithium battery. When you need to replace the battery,
follow the steps below.
1. Push and hold the locking tab to the right.
2. Pull out the battery holder.
3. Insert the new battery into the battery holder. The battery must be placed with the positive pole facing upwards
in the illustrated position.
4. Slide the battery holder back into the remote control.
WARNING
·
Protect the battery from overheating or excessive moisture.
·
Failure to replace the battery in the correct manner may result in damage to the battery.
·
Use only the approved specified batteries.
·
Properly recycle or dispose of used batteries according to local guidelines and regulations.
·
Do not throw batteries into fire. This may result in an explosion.
·
If the battery is completely drained or the remote control is not in use for a long time, remove the battery to
prevent leakage.
3
USING YOUR DIGITAL PHOTO FRAME
Please read these instructions carefully, and be reminded that the video function featured with the digital photo
frame is just intended as an aid. It is not a substitute for responsible, correct parental supervision.
NOTE
If you place the digital photo frame and camera units too close together, you may hear a high pitched noise. This is
not a fault. The units are designed to be operated at some distance apart, e.g. in separate rooms, so move the
units further apart.
3.1
Using the control buttons
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
10 of 24
Advertisement
Table of Contents
