ITEM #0699629 CROSSBRANCH CEILING FAN MODEL #00880 UL MODEL #52-CRB Harbor Breeze ® is a registered trademark of LF, LLC. All Rights Reserved. Español p. 18 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-473-4537, 8 a.m.
Page 2
TABLE OF CONTENTS WARNING Safety Information....................... 2 • ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, do not use this fan with any solid-state speed control device. Package Contents....................... 4 • ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, make sure the electricity has been turned off at the circuit breaker or fuse box before beginning installation.
Page 3
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) Wire Connector Fan Pull Chain Qty. 3 + 1 extra Light Pull Chain Extension Extension Qty. 1 Qty. 1 (NOT TO SCALE) (NOT TO SCALE) Blade Bracket PART DESCRIPTION QUANTITY Blade Screw Screw Rubber Gasket Qty.
Page 4
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Determine mounting method to use. 4. Install the mounting bracket (A) to the outlet box A - Downrod Mount (normal or angled ceiling) (not included) using the two screws provided B - Closemount (normal ceiling only) with the outlet box.
Page 5
DOWNROD STYLE FAN MOUNTING CLOSEMOUNT STYLE FAN MOUNTING 3. Loosen the two set screws from the yoke. Slip 2. Remove every other screw from the top of the downrod assembly (D) into yoke, aligning holes motor housing assembly (E) -- for a total of 3 in downrod assembly (D) and yoke.
Page 6
WIRING FINAL INSTALLATION 1. Connect the BLACK and BLUE wires from the 2. Re-install the two screws that were previously removed fan to the house BLACK wire. Connect the (step 3, page 6) to fully secure the canopy (B) to the Supply circuit WHITE wire from fan to the house WHITE wire.
Page 7
FINAL INSTALLATION FINAL INSTALLATION 5. Align the post of blade bracket (F) to the slot on the 8. Remove the preassembled finial (K) and glass cap bottom of the motor housing assembly (E). Secure (J) from the light kit (H). each blade bracket (F) using 2 blade bracket screws (EE).
Page 8
FINAL INSTALLATION OPERATING INSTRUCTIONS 11. To install the fan WITHOUT the light kit (H), you 1. PULL CHAIN: • The fan pull chain is for motor speed control: must special order a switch cover from our customer service department at 1-866-473-4537, 8 a.m. - 7 p.m., High, Medium, Low and Off.
Page 9
5. Lower fan or move it to another Downrod Assembly 102200-0212UB location. Blade Bracket 104000-0355UB Blade 108001-607459 Switch Cover 105005-0133UB Printed in China Harbor Breeze ® is a registered trademark of LF, LLC. All Rights Reserved. Lowes.com/harborbreeze Lowes.com/harborbreeze...
Need help?
Do you have a question about the 00880 and is the answer not in the manual?
Questions and answers