Installation; Selecting A Location; Getting Started; Connecting The Telephone - Plantronics CT10 Owner's Manual

INSTALLATION

SELECTING A LOCATION

Install the CT10 base unit in a location that is near an AC power outlet and a modular telephone line jack.
The base's location effects the phone's range. Try several locations to see which provides the best performance.
Install the CT10 base unit in a location that is near an AC power outlet and a modular telephone line jack.
The base's location effects the phone's range. Try several locations to see which provides the best performance.
Select a location that is away from, electrical machinery, electrical appliances, metal walls, filing cabinets, wireless
intercoms, security alarms, and room monitors.

GETTING STARTED

Unpack the unit and check to be sure you have all the items that come with your cordless telephone.
•
Telephone base
•
Remote keypad
•
Headset
•
3.6 Volt battery
•
Telephone line cord
•
Adaptor

CONNECTING THE TELEPHONE

Follow these steps to connect the CT10 base unit to a source of AC power and to the telephone line.
(See Figure 1)
1. Plug one end of the supplied modular telephone line cord into the TEL. LINE jack in the rear of the base unit.
2. Plug the remaining end of the telephone line cord into an existing modular telephone line jack.
3. Insert the power adapter cord plug into the DC 9V jack located in the rear of the base unit.
4.
Plug the adapter into an existing AC power outlet.
6