OPERATION
- continued
USING THE MUTE BUTTON
The MUTE button mutes the headset microphone so the other party cannot hear you when you are talking to
someone else in the room.
1. Press and hold the MUTE button located on remote keypad.
Release the MUTE button to resume your phone conversation. (See Figure 15)
2. When the MUTE button is engaged, you can still hear other party, this is normal.
FIGURE 15
USING THE FLASH BUTTON
Pressing the FLASH button provides the electronic equivalent of momentary pressing the hook switch which is
used for special telephone services such as Call Waiting.
1. For example, if you have Call Waiting, you can put the present call on hold and answer a second call by
pressing the FLASH button. (See Figure 16)
2.
Press the FLASH button again to return to the original call.
3.
If you do not have any special telephone services, pressing the FLASH button may disconnect your call.
4.
The redial memory does not store the FLASH entry or the digits you press after pressing the FLASH button.
MUTE
Button
12