3D Active Glasses
The 3DG-001-SDC 3D glasses enable you to view 3D images. To view 3D images,
you need both a pair of the 3D glasses and the Samsung 3D TV which is released
in 2011 or later. The Samsung 3D glasses communicate with Samsung 3D TVs
via the 2.4GHz RF band.
✎ The Samsung 3D glasses can be used only with the Samsung 3D TV released in
2011 or later, or a 3D TV product with the
and can't be used with any other wireless communication products.
✎ The "Full HD 3D Glasses™" Logo signifies compatibility between display
products and 3D Glasses that are compliant with the "Full HD 3D
Glasses™" format and does not indicate the picture quality of the 3D
images visible using the glasses, which depends on the quality of the
※ For information on how to attach the arms of the glasses, refer to page 4.
Pairing 3D Active Glasses
✎ What is Pairing? Pairing is a process of connecting 3D glasses and a 3D
TV so that the two devices can exchange data.
✎ Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50
cm) apart from each another while pairing is in progress.
Turning the glasses on
Press the power button briefly.
The green LED is turned on for
3 seconds. Make sure that 3D is
activated on the TV before using the
Turning the glasses off
Press the power button briefly. The
red LED is turned on for 3 seconds.
Performing the pairing process.
The green and red LEDs will blink for
2 seconds if pairing is in progress.
✎ The working distance depends on obstacles (a person, metal, walls, etc.) or
✎ Turn off the 3D glasses while they are not in use. If you leave the 3D glasses
on, the battery lifespan decreases.
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The 3D glasses will power
on and pairing will start.
3. The message "3D glasses are connected to TV." will be displayed on the TV
screen when the pairing is successfully completed.
¾ If the pairing failed, the 3D glasses will power off.
¾ If the first attempt to pair fails, power the TV off and on again and perform step 2.
¾ How to pair again: Press the power button on the 3D glasses for more than 2
<Pairing is needed again in the following situations:>
– If the The 3D glasses do not function even when the power button is
pressed on the 3D TV after repair.
– If you want to view a 3D video on a different Samsung 3D TV which is
released in 2011 or later.
3D Active glasses
& Power Button
(Frame body, Temples)
Liquid crystal shutter
Recommended pairing distance
Recommended viewing distance
(6 to 1
50 cm or less
Replacing the Batteries
If the red LED blinks every two seconds continually, replace the batteries with
Press down the
Push out the
edge of the flap
✎ Please insert the battery in the same direction as indicated.
o When viewing a 3D video under a fluorescent lamp (50 Hz – 60 Hz)
or 3-wavelength lamp, you may notice a small amount of screen
logo on it,
※ If this occurs, dim or turn off the light.
o Switching the input mode while watching a 3D movie may disable the
3D function on the TV. As a result, the 3D glasses may not function
and the movie may not be displayed properly.
o If the 3D glasses are moved outside of their working distance, the
signal from the TV will disconnect and the glasses' 3D function will
turn off after several seconds. The 3D glasses will power off 30
seconds after the 3D function turns off. When this happens, the red
LED will turn on for 3 seconds.
※ Under some circumstances, the 3D glasses may malfunction due to
interference from other devices.
o Ensure you are within the working distance of the glasses when you
view a 3D video.
※ The images may not be viewable in 3D if you move outside of the
working distance for 3 seconds.
o If you lie on your side while watching TV with 3D active glasses, the
picture may appear dark or may not be visible.
o The 3D glasses may not work properly due to interference from other
3D products or electronic devices that operate on the 2.4GHz
frequency such as a microwave oven or Internet AP. If he 3D function
malfunctions due to interference, please move all other electronic or
wireless communication devices as far away from the glasses and the
TV as possible.
o The 3D effect may be experienced differently depending on the
viewer. You may not notice the 3D effect at all if you wear glasses and
have an unusual prescription.
o If a part of the 3D glasses or lenses is defective or damaged, it
cannot be repaired and the glasses should be replaced. If the glasses
stop working within the warranty period, the glasses can be repaired
or replaced for free. If the glasses have been damaged due to the
fault of the customer or the warranty period has expired, a new pair
of glasses will have to be purchased.
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D IMAGES. READ
THE FOLLOWING CAUTIONS BEFORE YOU OR YOUR CHILD USE THE 3D
o Adults should frequently check on children who are using the 3D
function. If there are any complaints of tired eyes, headaches, dizziness
or nausea, stop the child from viewing the 3D TV and ensure that they
o Do not use the 3D glasses for other purposes such as general wear,
sunglasses, protective goggles, etc.
o Some viewers may experience discomfort such as dizziness, nausea
and headaches while viewing 3D TV. If you experience any of these
symptoms, stop viewing the 3D TV, remove the 3D glasses and rest for
o Watching 3D pictures for an extended period of time may cause eye
strain. If you experience any eye strain, stop viewing the 3D TV, remove
the 3D glasses and rest for awhile.
o Do not use the 3D function or 3D glasses while walking or moving around.
Using the 3D function or 3D Active Glasses while moving around may
result in injury from running into objects, tripping, and/or falling.
Swing the flap
Put the flap
Push the flap
battery with a
2011-12-09 오후 4:13:48
down unitl it