Advertisement
Adjustments
Warning!
Before riding, always make sure that the
basic settings made by Öhlins are according
to recommended Set-up Data. Read about
adjustments and setting up in the Öhlins Owner's
Manual before you make any adjustments.
Contact an Öhlins dealer if you have any
questions about setting up the shock absorber.
Compression and Rebound Adjuster
Use a 3mm Allen key
to adjust.
Set-up Data
Recommended set-up
Spring preload
Compression
Rebound damping
Shock absorber length
Stroke
Spring
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
+
-
12.5 mm
11 clicks
12 clicks
315
/
mm
+2
-2
63 mm
21040-36
(105 N/mm)
To find the latest information contact
your Öhlins distributor. Please
consult your Öhlins dealer if you
have any questions regarding the
contents in this document.
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
Hydraulic Spring
Preload Adjuster
Free spring length
Free Sag (R1-R2)
Ride Height (R1-R3)
Read about Free Sag and Ride height in
the Öhlins Owner's Manual.
Part no. SU932_1
Issued 2017-01-01
Öhlins Racing AB
Box 722
Compression
Damping Adjuster
Rebound
Damping Adjuster
Length Adjuster
!
160
/
mm
0
-3
15 mm
28 mm
www.ohlins.com
Advertisement
