Table of Contents
Advertisement
Preparing the answering machine (continued)
Mailbox usage
This phone offers you three voice mailboxes, providing a convenient
way to share the mailbox feature with other members of your
household or business.
When a caller calls
The caller can choose one of the two ways to leave a message:
• If calling from a touch-tone phone, the caller select a mailbox by
pressing (*)(1) (MAILBOX 1), (*)(2) (MAILBOX 2) or (*)(3)
(MAILBOX 3) while the caller hears the greeting. The greeting stops
and a beep will sound, then the caller can start recording a message.
• Wait until the greeting finishes, then start recording a message.
When the caller does not select a mailbox, the message is
automatically recorded to MAILBOX 1.
Notes
• If four minutes have passed while recording the incoming message, the line is
automatically disconnected.
• If the message is shorter than two seconds, it will not be recorded.
To turn off the answering function
Press (ANSWER ON/OFF) so that the red light turns off.
If you want to turn off the answering function from the handset, turn Jog
Dial down to make "ANSWERING OFF" flash in step 2 on page 41, then
press Jog Dial.
US
42
Answering Machine Features
Playing back messages (continued)
Note
Do not allow more than 20 seconds to elapse during the operation procedure.
Additional tasks when playing back messages
To
Do this
Adjust the speaker volume
Press (VOLUME) (+) or (-).
Adjust the handset volume
Set the VOL switch on the handset to H (high),
M (middle) or L (low).
Stop playback
Press the mailbox button on the base unit again
or press Jog Dial on the handset.
Replay the messages
Press the mailbox button on the base unit again.
Press >(SKIP/QUICK) on the base unit or
Skip to the next message
> SKIP (3) on the handset while the current
message is playing.
Press .(REPEAT/REVIEW) on the base unit or
Repeat the current message
. REPEAT (1) on the handset while the
current message is playing.
Go back to previous messages Press .(REPEAT/REVIEW) on the base unit or
. REPEAT (1) on the handset within the
first three seconds of the current message.
Keep .(REPEAT/REVIEW) on the base unit or
Review playback
REVIEW (4) on the handset pressed during
playback.
Keep >(SKIP/QUICK) on the base unit or
Play back quickly
QUICK (6) on the handset pressed during
playback.
44
US
Answering Machine Features
Playing back messages
Display
(ERASE)
.(REPEAT/REVIEW)
>(SKIP/QUICK)
To play back messages from the handset
Turn
Press
REVIEW (4)
Erasing messages
To erase the message one by one
Press (ERASE) on the base unit while playing back the message
with the base unit, or press ERASE (9) on the handset while
playing back it with the handset.
To erase all messages in a mailbox from the base unit
Press (ERASE) on the base unit, and a mailbox button
((MAILBOX 1), (MAILBOX 2) or (MAILBOX 3)) .
You hear a long confirmation beep and all messages in the
selected mailbox are erased.
To erase all messages in a mailbox from the handset
1
Press (REMOTE) and wait until the answering machine
function menu appears on the display.
If you hear five short error beeps and "OUT OF RANGE"
appears on the display, move closer to the base unit.
2
Turn Jog Dial down to make "ERASE MAILBOX 1" to
"ERASE MAILBOX 3" flash, and then press Jog Dial.
3
Turn Jog Dial up to make "YES" flash, and then press Jog
Dial.
You hear a long confirmation beep and all messages in the
selected mailbox are erased.
Notes
• The display shows the total number of "new" messages. Therefore, it is reset
to "0" (on the base unit) or "00" (on the handset) when you play back all new
messages, even they are not erased yet. Be sure to erase unnecessary
messages before the memory becomes full.
• When the number of new messages exceeds 99, "99" flashes on the display of
the base unit and "99" appears on the display of the handset.
• If a call comes in during playback, the playback stops.
• If a power interruption occurs or the AC power adaptor is disconnected
while erasing a message, all recorded message may be erased.
• Do not allow more than 20 seconds to elapse during the operation procedure
when you erase messages from the handset.
Tip
You can also listen to the messages or erase the messages from a outside phone
(page 50).
— 12 —
(MAILBOX 1)
When you come home
(MAILBOX 2)
(MAILBOX 3)
If (ANSWER ON/OFF) flashes in
red, or the message counter
shows the number of new
messages and "NEW" in the
MAILBOX indicator on the
display flashes, press the
mailbox button ((MAILBOX 1),
(ANSWER ON/OFF)
(MAILBOX 2) or (MAILBOX 3)).
(VOLUME)
The machine plays back from
the newest message received.
1
Press (REMOTE) and wait until the
answering machine function menu
appears on the display.
ALL MESSAGES
NEW 03 OLD 08
VOL switch
PLAY MAILBOX 1*
PLAY MAILBOX 2
(OFF)
> SKIP (3)
"*" is displayed at the right of a
QUICK (6)
MAILBOX number which contains
ERASE (9)
new messages.
If you hear five short error beeps
. REPEAT
and "OUT OF RANGE" appears
(1)
on the display, move closer to the
base unit.
2
Turn Jog Dial down to make
"PLAY MAILBOX 1" to "PLAY
MAILBOX 3" flash, and then press
Jog Dial.
The machine plays back from the
newest message received.
3
Press (OFF).
Answering Machine Features
Answering Machine Features
continued
43
US
45
US
Advertisement
Chapters
Table of Contents
