Record And Loop Functions - Flame Tame Machine Manual

6. record and loop functions

record: Record in REC switch position on top and playing of the parameters in switch
position at bottom.
liST oF recorded ParaMeTerS oF The rec SwiTcheS:
Rec switch 2 (switch 3 is in position KEYBOARD):
- Keynotes of the Keyboard and the moves of CV-2 ruler between 1..5 (= the octaves of key-
board notes)
Rec switch 2 (switch 3 is in position TRIGGER or LINK):
- Keynotes of scale
Please note: Both keynotes (from keyboard and scale) have the same value!
Rec switch 11:
- the motions of the three knobs (Gate, Beat, CV-2)
looP (automtical copy of measures):
Recording steps with different lenght of the loop. To arrange LOOPS faster, at position 1 or 2
the according steps of the not played measures are recorded too.
That means: if BAR is at 1 all other measures are recorded with the same played steps. So
the sequence goes on looping, even if you switch to BAR 4 (because all measures are the
same). Because of this, you can play the measures only separately when BAR=4.
If BAR is=2, the sceme is always 2-measured and recorded are always 1 and 3 at the same
time, as well as 2 and 4.
10