Configuration Using A 41U Modular Storage Cabinet - Compaq StorageWorks 9000 42U Configuration Manual

Modular array
Table of Contents

Advertisement

6 Modular Array Configuration Guide
Configuration using a 41U Modular Storage
Cabinet
Writer: Patrick Waychoff Project: Modular Array Configuration Guide Comments:
Part Number: EK-MACON-CA. A01 File Name: EK-MACON-CA-A01.doc Last Saved On: 4/3/00 3:52 PM
The 41U modular storage cabinet supports the following configurations:
NOTE: The following lists what the maximum number of each component that can be
installed in a 41U cabinet. The total number of components that will physically fit into the
41U cabinet is limited by the amount of space. See Table 2 for individual component
height.
I
No more than two Model 2200 controller enclosure shelves (each
controller enclosure can contain a maximum of two HSG80 controllers)
(DS-SE2ZS-C8 / 135820-B21)
I
No more than six Model 4214R disk enclosure shelves
(DS-SSL14-RS / 103381-001)
or six Model 4254 disk enclosure shelves
(DS-SSL14-RM / 103381-001)
I
No more than two Compaq StorageWorks SAN Switch 8
(DS-DSGGB-AA / 158222-B21)
I
No more than two Compaq StorageWorks SAN Switch 16
(DS-DSGGB-AB / 158223-B21)
I
No more than seven Fibre Channel Hub, 7-port
(DS-SWXHB-07 / 234453-001)
(DS-SWXHB-I7 / 234453-B31)
(DS-SWXHB-J7 / 234453-291)
I
No more than two Fibre Channel Hub, 12-port
(DS-GHGGB-AA / 295573-B22)
Compaq Confidential – Need to Know Required

Advertisement

Table of Contents
loading

Table of Contents