Timers; External Controls; General - IVT Greenline HE C6-C11 User Manual

Settings Customer level

10.6 Timers

Timers are used by the control unit to count down the
different time dependent functions such as Extra hot
water duration. At customer level the following timers
can be observed (only timers that are counting are
displayed):
Timer
Extra hot water
Alarm mode delay
Party
Operating time for heating at hot water
demand
Hot water, operating time at heating
demand
Heat pump x timers
> Compressor start delay
Additional heat timers
> Additional heat start delay
> Delay mixing valve control after
additional heat start
Tab. 34 Timers

10.7 External controls

When an external input is connected, the control unit
performs functions which are set to Yes or is separated
from 0 (Room temperature). When the external input is
no longer connected, the control unit returns to normal
mode. Only installed functions are displayed.
> External input 1, 2
>> Block compressor
>> Block heating
>> Room temperature
>> Block hot water production
> External input circuit 2, 3...(optional)
>> Block heating
>> Room temperature
Room temperature:
Factory setting
Lowest value
Highest value
Tab. 35 Room temperature
22
F value
0h
1h
0h
20min
30min
10min
60min
20min
No (0.0 °C)
10.0 °C
35.0 °C
B Set the room temperature that should apply in the
event of enabled external control.
B Value > 0 °C enables the function.
Other functions:
F value
Alternative
Tab. 36 Functions

10.8 General

Among other things, settings for date and time are
available here.
> Set date
Factory setting
Format
Tab. 37 Date
> Set time
Factory setting
Format
Tab. 38 Time
B Check and change, if necessary, date and time. These
are used by the control unit to manage the different
clock settings, e.g., holiday and room temperature
program.
> Summer/winter time
Factory setting
Alternative
Tab. 39 Summer/winter time.
B Select if there should be automatic change over
between summer and winter time or not (times
according to EU standard).
> Display backlight intensity
Factory setting
Lowest value
Highest value
Tab. 40 Display backlight intensity
B If necessary, change the background light of the
control panel.
> Language
B Change language, if desired.
No
Yes/No
yyyy-mm-dd
hh:mm:ss
Automatic
Manual/Automatic
100%
20%
100%
6 720 643 415 (2010/03)