Honda Clarity 2017 Electric Owner's Manual page 432

uuCharginguCharge the High Voltage battery using a Level 1, 2 or SAE J1772 DC charger
Charging Connector
Charge Indicator
Release Button
430
7. To connect the cable to the vehicle, push
the cable's charging connector until it clicks
to the charge lid.
u The charge indicator on the charge lid
stays on.
■
When charging is completed
Press the release button on the charging
connector to disengage it from the inlet.
u Make sure to put the cover back on the
inlet before you close the lid.
The charge indicator goes off once charging is
completed.
1How to Charge (DC)
If the charging connector does not disengage, do not
engage it forcefully, and follow the procedures
mentioned in the following page.
2 When You Cannot Disengage the Charging
Connector P. 517