Honda Clarity 2017 Electric Owner's Manual page 164

uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory Button 1
Memory Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
162
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
1. Put the transmission into ( P .
2. Apply the parking brake.
3. Press a memory button ( 1 or
(
u You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
1 or
( ( 2
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button or memory button
•
Adjust the seat position.
2 ).
(
•
Put the transmission into a position other than
1 ( or ( 2 .
( P .