Honda Clarity 2017 Electric Owner's Manual page 431

■
How to Charge (DC)
Lid Open
Button
Charge Lid
Inlet Cap
uuCharginguCharge the High Voltage battery using a Level 1, 2 or SAE J1772 DC charger
1. Stop your vehicle at a station specific for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the driver's door.
2. Put the transmission into P .
(
3. Turn off the power system.
4. Press and hold the charge lid release
button.
u The lid opens.
u The illumination lamp inside the charge
lid comes on for a few minutes.
5. Open the charge lid.
6. Remove the inlet cap.
1How to Charge (DC)
The charge speed slows down towards the
completion of the battery charging.
The charge lid can open by remote transmitter.
Be sure to follow the instructions and safety
precautions provided with the SAE J1772 DC charger
equipment.
While the vehicle is charging or is parked after
running, the compressor may operate to melt any
frost that has formed on the climate control system.
Water from the melted frost drains out through the
front section of the vehicle, near the undercover.
Continued 429