Table of Contents
Advertisement
Quick Links
INSTRUCTIONS
XM-KI6 / XM-KI7 / XM-KI8 / XM-KI9
ISOFIX CAR SEAT (with top tether) Group 1,2,3
INSTRUCTIONS: PLEASE READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE. YOUR
CHILD'S SAFETY MAY BE AFFECTED IF YOU
DO NOT FOLLOW THESE INSTRUCTIONS.
This product conforms to ECE R44.04
Group 1,2,3 child car seat.
Suitable for children from 9kg to 36kg (approx 9
months to 12 years old)
Advertisement
Table of Contents
Related Manuals for Xomax XM-KI6
Summary of Contents for Xomax XM-KI6
- Page 1 INSTRUCTIONS XM-KI6 / XM-KI7 / XM-KI8 / XM-KI9 ISOFIX CAR SEAT (with top tether) Group 1,2,3 INSTRUCTIONS: PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS. This product conforms to ECE R44.04 Group 1,2,3 child car seat.
- Page 2 1.1 NOTICES 1. This child car seat is approved for two different types of fitting: a) “Universal ISOFIX” for use as a group 1 [9-18kg] car seat locked onto the vehicle’s ISOFIX anchor points in conjunction with the car seat’s integral 5-point harness.
-
Page 3: Getting Started
1.2 GETTING STARTED Read carefully before attempting to fit the child car seat WARNING: NEVER leave your child unattended – your child’s safety is your responsibility. WARNING: The child car seat must be fitted in accordance with the manufacturer’s instructions. Incorrect installation could be dangerous. - Page 4 from inside. WARNING: Allow the child a break during long car journeys and make sure they don’t get out of the car unaided and without supervision. WARNING: The child car seat must be fitted securely to the passenger seat. Ensure that it is not loose or wobbly after you have fitted it. If it is loose, re-fit it.
- Page 5 WARNING: Avoid winter clothing bundling - bulky clothing can lead to incorrect harness tightening. In an accident, the child can slip right out of the extra padding - and thus out of the seat. Let the car warm up or cool down prior to placing your child in there if possible.
-
Page 6: Part Checklist
original owner uses it. WARNING: You MUST replace the child car seat and your vehicles seatbelts if they becomes badly worn or damaged. WARNING: You MUST replace the child car seat if it is involved in an accident – it may have unseen damage and may not protect your child as well as they should. -
Page 7: Positioning The Car Seat
1.4 POSITIONING THE CAR SEAT The child car seat MUST ONLY ever be used on a forward facing passenger seat WITHOUT an active airbag. Whilst in group 1 mode, the child car seat can only be installed using the ISOFIX anchor points WITH the top tether. It MUST NOT be installed with out the top tether whilst in group 1 mode. - Page 8 similar to (B). If unsure or in any doubt then consult your vehicle manufacturer. 2. Locate your vehicle ’ ’ ’ ’ s top tether anchor points. These may be either located high up near a parcel shelf (Type 1), or low down on the vehicle floor (Type 2) or on the back of the passenger seat(Type 3).
- Page 9 1.5 ADJUSTING THE HEAD/HARNESS HEIGHT The headrest height can be adjusted by pulling out the adjustment button and at the same time pushing the headrest up and down. Make sure the headrest is locked into place. 1.Remove the harness strap loops from the yoke. 2.Pull the harness straps through the backrest.
- Page 10 1.6 FIVE POINT POSITIONING Position the height of harness according to the child’s height.The harness straps should be level with or just above the child’s shoulders.Do not use the child restraint with the harness if thechild’s shoulders are above the highest slots in the backrest or if the child’s weight exceeds 18kg.
- Page 11 1.8 ADJUSTING THE BUCKLE ADJUSTING THE BUCKLE 1.Join the 2 buckle metal connectors. 2.Pass both connectors through the slot in the upper part of the both connectors through the slot in the upper part of the buckle until you hear a “click”. 3.
- Page 12 1. Pull the harness straps up to remove the slack Pull the harness straps up to remove the slack from the lap section of the harness, then pull the from the lap section of the harness, then pull the harness regulating strap until the harness is fully harness regulating strap until the harness is fully stretched.
- Page 13 1.11 ADJUSTING THE ISOFIX Pulling the red handle attached to the base meanwhile pull out both ISOFIX arms as far as they will go.If you want to remove ISOFIX fitted, Pulling the red handle attached to the base meanwhile pull in both ISOFIX arms as far as they will go.
- Page 14 red ISOFIX/EASYFIX system strap(Refer to 1.11). 3. Position the car seat on the rear seat of the vehicle bring the ISOFIX/EASYFIX connectors in line with the seat’s ISOFIX anchor points . 4. Click the ISOFIX/EASYFIX connectors into the anchor points; the indicators on each connector should turn from red to green.
- Page 16 10. If you want to remove ISOFIX fitted, Pulling the red handle attached to the base meanwhile pull in both ISOFIX arms as far as they will go. Group 2&3 (15-36kg) with 3-point Safety Belts, Universal u Ensure the child car seat is correctly installed using either the ISOFIX system or if no ISOFIX system is available, that the child car seat is pushed firmly into the vehicle seat.
- Page 17 Group 2&3 (15-36kg) with 3- point Safety Belts + Additional point Safety Belts + Additional Attachments (FIT), Semi- universal use universal use If you are just using the 3-point seatbelt +additional attachments (FIT) +additional attachments (FIT) to install the car seat, then you MUST NOT use the top tether. NOT use the top tether.
-
Page 19: Removing The Cover
REMOVING THE COVER Remove the headrest cover. Remove the backrest cover. Remove the cushion cover`. CARE & MAINTENANCE 1) Store this child car seat in a safe place when not in use. 2)DO NOT place heavy objects on top of it. 3) Always store the child car seat in a dry environment. - Page 20 11)You must not oil or lubricate any part of the seat shell. 12) The child car seat may have a slight rattle when not in use, this is normal. If in any doubt, contact distributor immediately. 13) Check the adjustable parts of your child seat at intervals of about 6 months to ensure it is still fits correctly for your growing child.