Advertisement
3.4
Remove the steel adaptor from the cylinder
tube adaptor.
3.5
Apply function grease (00159-01) on the
original O-ring and insert it in the fork bottom.
3.6
Insert the steel adaptor in the fork bottom.
✋
Cautiong!
Make sure to install the adaptor correctly. See
figure.
oteg!
1
Do not install the original steel washer removed
in chapter 2.
3.7
Apply function grease (00159-01) on the O-ring
and install the plug provided in the kit. Tighten
to 12 Nm.
3.8
Apply threadlocker (01791-05) on the steel
tube. Tighten to 130 Nm.
3.9
Apply threadlocker (01791-05) on the steel
tube lock screw. Tighten to 3 Nm.
3.10
Carefully insert the cartridge in the fork
leg. Apply [moly-grease or equivalent] on
the adaptor thread. Use the seal head tool
(01797-09) to install the cartridge into the front
fork and tighten to 30 Nm.
oteg!
1
Make sure that the seal head tool clamps
around the seal head and the cylinder tube
extension.
3.4
3.7
3.10
5
3.5 3.6
3.9
Advertisement
