Advertisement
3 Install the Öhlins front fork cartridge kit
✋
Cautiong!
We strongly recommend that you work with
one leg at a time, make sure not to mix the
parts.
✋
Cautiong!
The kit consists of one compression cartridge
and one rebound cartridge. Note the marks.
Make sure you install the cartridge in the
correct fork leg;
REB (Rebound) in the right fork leg.
COMP (Compression) in the left fork leg.
3.1
Remove the top cap.
3.2
Remove the spring support and the preload
tube.
3.3
Use the seal head tool (01797-07) and the
cylinder tube holder (00787-07) or the soft
jaws (00727-09) to loosen the seal head from
the cylinder tube extension just enough to align
the grooves on the seal head with the grooves
on the cylinder tube extension.
✋
Cautiong!
Do not loosen the seal head more than is
necessary to align the grooves. If you loosen
the seal head too much the oil may leak.
3.1
3.2
3.3
4
seal head
cylinder
tube
extension
Advertisement
