Advertisement
MOU TI G I STRUCTIO S
⚠
arningg!
We strongly recommend to let an Öhlins dealer
install this product.
⚠
arningg!
If you work with a lifted vehicle, make sure that it
is safely supported to prevent it from tipping over.
oteg!
1
When you work with this product, see the
vehicle service manual for vehicle specific
procedures and important data.
oteg!
1
Before you install this product clean the vehicle.
1 Remove the original front fork
1.1
Put the motorcycle on a work stand so that the
front wheel barely touches the ground.
1.2
Remove the front fender, the brake calipers
and the front wheel.
1.3
Release the spring preload.
1.4
Note the fork leg position.
1.5
Loosen the screws to loosen the upper triple
clamp.
1.6
See the vehicle service manual for correct tool
to loosen the top cap ½ turn, do not remove it.
1.7
Loosen the screws to loosen the lower triple
clamp.
1.8
Remove the fork legs.
1.3
1.4
1.5
1.6
1.8
2
1.2
1.1
1/2 turn
Advertisement
