Table of Contents
Advertisement
English
Dansk
Deutsch
Español
Selecting a connected device
During the setup process you may have connected an
audio/visual device such as a cable/satellite set top
box, Blu-ray Disc™ player, DVR, DVD or CD player.
These would typically be connected to inputs 1-5 on
the rear panel of the control console.
Your connected devices will appear in the SOURCE
menu.
1. Press the Source select button on the remote
control to display the SOURCE menu.
The currently selected source is highlighted as
shown in the following example:
Français
Italiano
Nederlands
O
PERATING
Highlighted
source
Svenska
Y
C
OUR
ONNECTED
2. Continue pressing the Source select button to
move the highlight down the list and select the
source you want.
• If you named a device during the setup process,
its assigned name appears in the list. Unnamed
devices will appear as generic inputs such as
"Input 1 (HDMI)" and "Input 2 (HDMI)."
• You can also use the up or down
navigation buttons to move the
highlight up and down the list.
D
EVICES
7
Advertisement
Table of Contents
