Daikin FWF02B7TV1B Installation Manual page 22

4 Install the fan coil unit
Z1F
TC
Wired remote controller
R1T
SS1
Wireless remote controller (Receiver/display unit)
A3P, A4P
BS1
H1P
H2P
H3P
H4P
SS1
SS2
Connector for optional parts
X24A
X33A
X35A
X40A
Notes
1 If a remote controller is used, connect it to the unit in accordance with the controller
installation manual.
2 The remote controller model varies according to the combination with the system.
See technical data, catalogues, etc. before connecting.
3 Ground the shield of the remote controller wire to the indoor unit.
(in case of using shield wire)
4 When using the central remote controller, see manual for connection to the unit.
5 X24A,X33A,X35A and X40A are connected when optional accessories are being used.
6 X24A is connected when the wireless remote controller is being used.
7 Availability of R2T and/or R3T is depending on model type.
Installation manual
18
Ferrite core
Signal transmission circuit
Thermistor (air)
Selector switch (main/sub)
Printed circuit board
Push button (ON/OFF)
Light emitting diode (ON - red)
Light emitting diode (timer - green)
Light emitting diode (filter sign - red)
Light emitting diode (defrost - orange)
Selector switch (main/sub)
Selector switch (wireless address set)
Connector (wireless remote controller))
Connector (valve control adaptor)
Connector (external adaptor)
Connector (ON/OFF input from outside)
FWF
Fan coil units
4PW64524-1 – 09.2010