System - D-Link DHP-W611AV User Manual

Section 3 - Configuration
This page lets you both save and update the settings of your DHP-W610AV.
Save Settings To Use this option to save the current DHP-W610AV configuration
Local Hard Drive: settings to a file on the computer you are using. Click the Save
button. You will then see a file dialog where you can select a
location and file name for the settings.
Load Settings Use this option to load previously saved DHP-W610AV
From configuration settings. Click Browse to find a previously
Local Hard Drive: saved configuration file. Then, click the Upload Settings
button to transfer those settings to the DHP-W610AV.
Restore to This option will restore all configuration settings back to the
Factory Default settings that were in effect at the time the DHP-W610AV was
Settings: shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created. If
you would like to save the current DHP-W610AV configuration
settings, use the Save button above.
Reboot the Click to reboot the DHP-W610AV.
Device:
D-Link DHP-W611AV User Manual

System

23