Network Settings - D-Link DHP-W611AV User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the DHP-W610AV and to configure the DHCP settings.
Device Name: You can customize the Device Name of your DHP-W610AV.
You will use this name to connect to it through a web browser.
The default name is listed on your Wi-Fi Configuration Card.
LAN Connection Use the drop-down menu to select Static IP or Dynamic IP
Type: (DHCP) to automatically obtain an IP address on the LAN/
private network. For Static IP setup, please see the next page.
IPv6 Connection Your Internet Service Provider (ISP) may require this to be set
Type: a certain way for Internet access. You can choose from Static
IPv6, Autoconfiguration, or Link-local Only. Contact your
ISP for more help on the above requirements.
IPv6 DNS This shows the current IPv6 address of the DHP-W610AV on
Settings: your network.
Click Save Settings for the changes to take effect.
D-Link DHP-W611AV User Manual

Network Settings

16