Plc Settings - D-Link DHP-W611AV User Manual

Section 3 - Configuration
This section will show you how to configure your new Powerline device using the web-based configuration utility.
Network Name: You can set the name of your network and set it as either
public or private. Make sure the network names of all of the
devices within your Powerline network is the same.
Public Network Select this option if you would like to make your Powerline
Name: network public using "HomePlugAV" as the default network
name. Since this is a commonly used network name, it is less
secure than a private network name.
Private Network Select this option if you wish to make your Powerline network
Name: more secure by using a private network name.
Network List: This section lists devices connected to your Powerline
network as well as their MAC address and connection speed.
Click the Scan button to scan for new Powerline devices. This
list is automatically updated and will refresh with this page.
QoS Settings: Here you can set the Quality of Service (QoS) Settings for
each network device. QoS helps you prioritize network traffic
based on the device or port.
MAC Address/ Select a device from the Client List dropdown box and then
Priority: click the << next to Computer Name to automatically fill in
the device's MAC Address. Then set the order of priority for
the device under the Priority dropdown box. Clear settings
for a rule using the Clear button.
Click Save Settings for the changes to take effect.
D-Link DHP-W611AV User Manual

PLC Settings

18